Tungsten Canopy 3.5 oz

Tungsten Canopy 3.5 oz

The 3.5 oz Tungsten Canopy not only weights the car but also helps you to build a super cool and futuristic looking Pinewood Derby racer. The canopy has a domed top and the bottom has a mounting stud that is ½ inch in diameter and ¼ inch long. The Tungsten Canopy can be easily used for pinewood derby car weighting if the weight of the car body, wheels, and axles is less than 1.5 ounces

Dimensions: 1¾″ x 1¼″

Instructions:
1. Drill a 1/2 inch diameter hole into the top of the car body
2. Apply epoxy in the hole
3. Spread just a little epoxy on the top of the car around the hole
4. Mount the canopy
5. Allow it to thoroughly dry